Contact
support@ohptools.com
Guide on How to Configure Settings Using FORScan for Heated Steering Wheel Installation
· ·

Guide on How to Configure Settings Using FORScan for Heated Steering Wheel Installation

· ·

This guide works for Ford 2015-2017 F150 owners who are planning for a heated steering wheel upgrade. These are the values that you need to program using FORScan:

FCIM:

7A7-01-02 XXX8 XXXX XXXX

HSWM:
714-01-01: 0000 0000 1D
Pick One:
714-02-01: 0244 4444 xx - Wheel Temperature = 68ºF - 2013/2014/2015 Fusion/MKZ Default
714-02-01: 024C 4C4C xx - Wheel Temperature = 76ºF
714-02-01: 0254 5454 xx - Wheel Temperature = 84ºF - Mondeo Default
714-02-01: 0258 5858 xx - Wheel Temperature = 88ºF
714-02-01: 025A 5A5A xx - Wheel Temperature = 90ºF
714-02-01: 025C 5C5C xx - Wheel Temperature = 92ºF - 2016/2017 Fusion Default
714-02-01: 025E 5A5E xx - Wheel Temperature = 94ºF
714-02-01: 0264 6464 xx - Wheel Temperature = 100ºF - 2016/2017 MKZ Default

APIM:
(Pick one) for On-Screen Control:
7D0-01-01: xxxx xxxx x4xx - Heated Steering Wheel Only
7D0-01-01: xxxx xxxx x7xx - Heated Steering Wheel and Seats
7D0-01-01: xxxx xxxx x6xx - Heated Steering Wheel and AC/Heated Seats

IPC:
Only change if the vehicle is equipped with a remote starter and has IPC RS controls. It will warm up wheel when the remote is started
720-02-02: xxxx xXxx - Add 4 to existing value
Examples: 9->D, A->E, B->F


*Special thanks to the online community who have created the original resource

 

To apply these settings using FORScan, you will need a reliable OBD2 adapter. These are our featured OBD2 adapters that work flawlessly with FORScan: