18 Dec, 2021

How to Navigate the Different Functionalities of ISTA+

The ISTA+ software has several functionalities that you need to fully understand to use the software correctly. The software functionalities include repair instructions, system instructions, technical data, procedures, and many more. Familiarizing these functionalities will help allow you to harness and apply the full capabilities of ISTA+ for any coding or programming work.

Read article

19 Nov, 2021

How to Update and Program the DME of Your BMW Using WinKFP

Wanting to access and program your BMW's DME? This can be done using a BMW software called WinKFP.

Read article

24 Sep, 2021

How to Code New BMW Fuel Injectors with INPA

Coding is required when changing and installing new fuel injectiors on your BMW. This can be done with the use of the INPA software.

Read article

20 Aug, 2021

How to Do Transmission Adaptation Reset on your BMW with INPA

The best way to do a Transmission Adaptation reset on your BMW vehicle is to apply the configurations using a compatible software and a cable. It is highly recommended that you use the INPA software for this process.

Read article

16 Mar, 2021

How to Read Error Codes and Activate Features of your BMW with INPA

If you've tried tinkering with the features of your BMW before, you've probably heard of INPA. INPA is a BMW software that is often used by advanced users for diagnosing or coding.

Read article

11 Dec, 2020

How to Code the BMW Brake Force Display with NCS Expert

The Brake Force Display signals drivers behind a BMW vehicle that a heavy brake was used to allow them to react in time. This technology aims to help reduce the chances of rear-end collisions. This can be coded on a BMW vehicle using the NCS Expert software tool.

Read article

03 Dec, 2020

How to Register and Code a New BMW Battery with Tool32 and NCS Expert

When replacing a new battery to your BMW vehicle, it is essential that you register and code it to your vehicle's system. These process can be done using the Tool32 and NCS Expert BMW software.

Read article

17 Sep, 2020

How to Program and Code your BMW with ISTA/P

ISTA/P stands for Integrated Service Technical Application/Programming. It is a dealer-level diagnostic software that replaced the older version SSS Progman programming software. ISTA/P is primarily used for processing all coded, programmed, and enable-dependent control modules of BMW vehicles.

Read article

Blog